Coil for Elzapp 2

Product detailed description

Coil for Elzapp 2 is designed primarily for emitting at low frequencies up to 200 Hz, where the principles of bioresonance are not applied. Classical magnetotherapy and rehabilitation most often use a frequency spectrum up to 100 Hz, and setting the frequency for this purpose is not as critical as it is with the bioresonance method. For these purposes, Elzapp 2 can therefore be used independently - only with its own integrated generator.

Conversely, when using the bioresonance method, an external excitation generator (ElZapp, SRZ, FSCAN...) is practically essential, because using Ramaloop only with its own generator is unnecessarily complicated in these cases. The Coil for Elzapp 2 can also be stimulated in Booster mode if necessary, when pulses with greater energy are used. When the booster mode is switched on, it is desirable to have Elzappp 2 permanently connected to the charger, otherwise the built-in battery will discharge very quickly. The Coil for Elzapp 2 extends the usability of the Elzapp 2 device to another area of personal health care. Consult your advisor about using the Coil for Elzapp 2.

Warning: (For the original Elzapp devices manufactured until the end of January 2022, this function is not available and cannot be retrofitted; it is a different hardware base.)

Coil for Elzapp 2 is designed only for Elzapp 2 devices manufactured from February 2022.